Unlimited possibilities with no compromise.
Choose the optimal loading and unloading length according to your production needs. Optimize your production flows, control two machines with a single operator by choosing your LT7 "right-handed" or "left-handed" version

Convenient solutions for uninterrupted work.
You can load LT7 with round tubes, square tubes, rectangular profiles, open profiles, or special sections, either manually, with a bridge crane, or forklift. Always easily.
Production changes happen instantly and manual adjustments aren’t necessary. The universal support templates automatically adjust according to the type of workpiece. Lightweight, flexible tubes are supported with additional lateral guides during fast rotations. Heavy and stiff tubes are totally free to move using the integrated steel cylindrical rollers.
The rear loader is open and accessible. The loading chains, in addition to the bundle cradles, which can be quickly removed, allow you to select the most suitable loading configuration according to batch size or section. You can also integrate robotic loaders or automated storage systems.
Multiple destinations to never stop.
The three programmable unloading positions allows you to keep finished parts organized and simplifies part collection, saving time and never interrupting production. Scrap is also accumulated in external and removable bins without ever having to stop the system.
The unloading system changes, the quality remains the same.
Quality guaranteed always: the parts are always resting on the unloading platform during processing. Long parts receive additional side support during rotations, thanks to the templates on the unloading platform, optimizing the machine dynamics during operation.

Thin cutting head so you can process anywhere.
Cut any geometry on any section.
Thanks to the slim design of the Tube Cutter head, developed by BLM GROUP, you can work in total freedom, cutting a wide range of special profiles and open sections, wihtout restrictions.

Active Tools:
smart functions to improve your productivity.
Active Tools:
smart functions to improve your productivity.
Let Active Tools handle the adjustments for you.
LT7 Applications
LT7 Applications












Save time and material.
Using the dynamic compaction (nesting) function, the LT7 sets the sequence of the parts to be cut along the tube to minimize the end-of-bar scrap, making unloading operations easier and faster.

Quality outside and inside.
Avoid needing to clean inside the tube after laser cutting. Activated at any time without having to retool the machine, the tube cleaner device is inserted through a suction probe into the tube and collects waste and fumes generated during processing.
Choose the safety
for your job.
LT7 is a Class 1 system. There is no risk of coming into contact with laser beam emissions and reflections during operation. Because it is important to work in total safety in compliance with the highest standards dictated by EC regulations.
Special glass and a properly sealed cutting area protect you from the risks of laser radiation, while an independent safety system allows you to introduce a new tube beam without interrupting production.
Integrate Lasertube and tube bender with ALL-IN-ONE.
Integrate Lasertube and tube bender with ALL-IN-ONE.
When bending a laser-cut part, elongation resultss in the curved areas that shift the previously made geometries.
BLM GROUP Lasertubes and tube bending machines automatically solve these errors by exchanging information on the mechanical characteristics of the tube and making corrections to compensate for elongation.
That's how you get perfection from the first part!

It has eliminated scrap and trial runs and now produces laser cut and bent tubes right from the start.
Find out how it achieved this with All-In-One.
Increase your
production efficiency.
Increase your
production efficiency.
Protube provides reliable quotes and allows you to identify the best production strategy for both single parts and entire production batches.
It also allows you to manage logistics planning, monitoring and productivity analysis phases, with the possibility of integrating with your ERP.
.
All the systems communicate with each other and simulate the manufacturing process to support the solution of daily start-up and production changeover problems.
LT7 technical information
Laser
Fibre source
3 kW
Cutting head
BLM GROUP 3D Tube Cutter
Loading
Bundle and single bar loading
fully automatic
Minimum loadable length
1,9 m
Maximum loadable length
6,5 – 8,5 m
Beam loading capacity
5.000 kg
Unloading
Three programmable positions, rear conveyor belt and motorised front and rear collection benches.
Unloading length
4,5 – 6,5 – 8,5 m
Power consumption
Average drawn power
15 kW (O2 cutting gas)
Average drawn power
20 kW (N2 cutting gas)
Standard machine loading 6.5 m and unloading 4.5 m
Available versions
right or left
Machine weight
23,900 kg (including fume extraction)
