LT14 / LT24
Great solutions for big projects.

The right size for your work.

Up to 355 mm for the LT14 and up to 610 mm for the LT24, with loading and unloading lengths from 12, 15 or 18 (LT24 only) meters. There is an ever-increasing demand for structural steel applications offering numerous job opportunities.

LT14 basic configuration and material flow

LT14 basic configuration and material flow

Layout LT24

LT24 basic configuration and material flow 

Haven’t you decided which configuration yet?
Don’t worry, we are there to advise you.
 
Ask our experts
Loading
Unloader
Handling

Firmly gripped to destination

Along the entire process (loading, cutting, and unloading), each tube and section loaded in the machine is always supported and transferred from each machine zone. This eliminates the risk of damage during processing, and even more importantly, each finished cut part.


Cut for the future

Interlocking of round steel sections for bridges
Interlocking of round steel sections for bridges
Steel tube for farming machinery
Steel interlocking for a structural frame
Steel roofing element for sports stadium
Tubular steel component for farming trailer
Marine oil sector load-bearing structure
Steel tie-rod for a funicular
Wind turbine blade for the renewable energy sector
Automatic nesting saves material


Save time and material.

Use all the material and minimize scrap at the end of the tube. The machine determines how to gain the greatest yield from each bar, automatically optimizing the nesting sequence.

IPE section with rust and laser processing


Effective cuts also on dirty or rusty surfaces.

With the special pre-cutting working mode, the laser first cleans the material along the cutting path and then proceeds the cutting process. Expensive or high-demand material will not be wasted.

Choose the safety
for your job.
 

LT14 and LT24 are Class 1 laser system built in compliance with the highest safety standards and CE regulations.  

Special safety-glass and sealed cutting area provide safe observation of the processing area during operation, while an independent safety system allows you to introduce a new tube section without interrupting production. 


Increase your
production efficiency.

 

Protube provides reliable quotes and allows you to identify the best production strategy for both single parts and entire production batches.

It also allows you to manage logistics planning, monitoring and productivity analysis phases, with the possibility of integrating with your ERP.
.
All the systems communicate with each other and simulate the manufacturing process to support the solution of daily start-up and production changeover problems.

Find out more


LT14 / LT24 technical information 

LT14

LT24

Laser

Source

3.5 – 4.5 Fiber (CO2)

(higher on demand) 

3.5 – 4.5 Fiber (CO2)

(higher on demand) 

Cutting head

3D

3D

Loading

Front chain loader 

Fully automatic 

Fully automatic 

Minimum loadable length 

3 m

4 m

Minimum unloadable length 

12 - 15.5 m

12 - 15.5 - 18 m

Unloader

Front chain unloader 

Fully automatic 

Fully automatic 

Unloading length 

max 12 - 15.5 m

max 12 - 15.5 – 18 m

Machinable tubes 

Bar weight 

100 kg/m

300 kg/m

Machinable thickness 

max 16 mm

max 16 mm

32.5 m x 9.4 m (106’7” x 30’10” )

LT24: Loader 14 m (45'11") - Unloader 10 m (32'9")

31.8 m x 7.1 m (104’3’ x 24’3”)

LT14: Loader 12 m (39’4”) - Unloader 10 m (32’9”)

Training
A complete package for you and your operators is included in the purchase.
Find out more
Maintenance
You can take care of it or we can do it for you.
Find out more
Awareness
Evaluating the investment with the help of one of our experts is easier.
Find out more