- Home
- Machines
- Tube end-forming machines
- 3-RUNNER
- Technical Information
3-RUNNER
Coil-fed straightening, cutting
and end-forming
and end-forming
Your process in just-in-time perspective
Choose the configuration that best suits the processing you want to perform.
End-form the part the
way you want
Configure the end-forming module with four fixed rams and a rotary finisher/rolling device or six fixed rams, and the integrated unloading system.
Exchange ram form tools quickly! The set-up is automatic and does not require manual adjustments.
The quick-change system is designed to be simple and allow you to change each ram form tool in a few seconds, eliminating any risk of positioning or clamping errors, even by inexperienced operators.
A device cut to your needs
A device cut to your needs
For clean, chip-free cutting
Eliminate swarf and achieve the highest edge quality by using the orbital scoring device that can be integrated in the machine or in the final end-forming module.
Very fast, very versatile
Maximize productivity with the saw cutting system fitted on the end-forming module and managed by a dedicated electric axis. .
Are you ready for a
new production?
Exchange ram form tools quickly! The quick-change system is designed to be simple and allow you to change each ram form tool in a few seconds, eliminating any risk of positioning or clamping errors, even by inexperienced operators.
The set-up is automatic and does not require manual adjustments.
Perfect repeatability and quality
Have complete confidence in the quality of your batch using the dimensional geometry control in real-time and on each part.
3-RUNNER Applications
3-RUNNER Applications
Choose the safety
for your job
3-RUNNER is CE certified and designed with safety features to
protect the operator during machine operation.
VGP2D:
learn and start immediately.
Program the work sequence simply and intuitively. Simply select the punch you want to use and VGP2 programming software will set the optimal parameters for you.
You decide where to start
Choose the coil feeder that best suits your production or space requirements: vertical, horizontal or Jumbo.
The tube advancement and recovery is performed in-process and the motor is controlled in both directions.
The feeder may be used in idle mode by selecting the function on the VGP3D program which is fully integrated with the machine software.
Bend from coil with mandrel!
Bend from coil with mandrel!
Connect the 3-RUNNER to the SMART and create a fully integrated process feed from a coil, end-form, cut and bend with mandrel.
Reduce the cycle time and the cost per part by performing several operations in parallel.
Eliminate semi-finished products to be handled and stored.
Bend with mandrel and comply with the strictest tolerances (average radius, diameter and thickness).
And it doesn't stop here. Discover our complete production solutions.
3-RUNNER Technical Information
Maximum round tube bending capacity
Aluminum
28.6 mm x 1.5 mm
Copper
28.6 mm x 1.5 mm
Mild steel (R= 360 N/mm²)
14 x 1 mm
Stainless steel
18 mm x 1 mm
Machine features
Axes
Up to 8
X Accuracy
± 0.05 mm
Passage
30 mm
Max. installed power
12 kW (16 kW with accessories)
Average drawn power
4 kW
Machine weight without end-forming module
1,750 kg
End-forming module weight
1,350 kg
Handling
Up to 9 axes all governed by CNC