Cutting & End-machining

CNC sawing and end-machining machines for tubes and bars

  • For tubes max. Ø 102 mm (4")
  • Automatic adjustments
  • Max. part length 4500 mm (177")
  • For tubes max. Ø 80 mm (3.15") (single bar)
  • 2 x max. Ø 45 mm (1.77") (double bar)
  • Max. part length 6090 mm (240")
  • For tubes max. Ø 102 mm (4")
  • For solid bars max. Ø 65 mm (2.5") (steel alloy)
  • For solid bars max. Ø 102 mm (4") (aluminium alloy and brass)
  • Cutting length 5 (.20") - 500 mm (19.6”)
  • Cutting, inner/outer chamfering, measuring
  • For tubes from Ø 10 (.4") to 80 mm (3.15")
  • For solid bars max. Ø 60 mm (2.36")
  • Part length from 10 (.4") to 350 mm (13.75")
  • Cutting, turning and inner/outer threading, piercing/radial milling
  • For tubes from Ø 10 (.4") to 80 mm (3.15")
  • For solid bars max. Ø 60 mm (2.36")
  • Part length from 10 (.4") to 600 mm (24")
Which sawing machine? Pick your machine

The BLM GROUP disc cutting systems are the result of over sixty years of expertise in tube handling and processing.

All machines are equipped with automatic loading and unloading devices. Adjustments are simplified and centralised to change production quickly.

Our expertise is pre-loaded on the machine

No particular experience is needed to start production because each machine integrates a complete cutting parameter database for all the required materials, thicknesses and sections. Programming takes only a few seconds by using user-friendly procedures and a large touchscreen.

Add value to production: concatenated operations

Further operations can be concatenated to add value to the cut parts and make the process even more convenient.

Not only cutting... but also stock removal on the same machine!

It can often be handy to add value to your production.
With the BC80 or the EM80, you can perform value stock removal operations on the same machine in addition to cutting to make simple bushings or complex turned, threaded or even radially drilled parts. Certainly an opportunity worth considering!