Forming your ideas

All-electric tube forming machines with up to 10 tons of force

See what’s possible
Compact. To do everything you want

Compact CNC tube end forming machine with a punch table that works horizontally. No overhead structures to cause interferences. A large number of forming tools can be used in tube processing. Do, really do, everything you need, without limits.

Growing, up to ten processing stations

Tapering, flaring, closing, facing, cutting and more. Choose the processes that you need and configure the E-SHAPE tube forming machine. The machine is set up for ten processing stations and may be freely equipped with ram stations, rotary tools or cutting tools. By combining these technologies, you can obtain parts with repeatable end forms, finish and quality. If you want, with the E-SHAPE you can also benefit from automatic consecutive ‘head-tail’ operation to process both ends of the tube.

Tube forming machine E-SHAPE
Thousands of shapes

Having 10 tons of force means being able to perform complex shapes end forming in thick walled materials or stainless steel tube.
One-of-a-kind shape freedom.

Many possible configurations. Choose yours

Choose the most suitable configuration of the tube end forming machine E-SHAPE for your job.

And you are even faster!

Being able to work with a rigid, horizontal punch holder table with 10 available punches does not mean working slower. Single punch advancement and variable length strokes can be exploited to optimize the cycle times without trade-offs.

And you are even faster!
You can also trim on the machine

By fitting an orbital cutting device on the tube forming machine E-SHAPE, you can eliminate a secondary cut off operation that would typically require special fixturing to position a bent part for forming.

That is a function you will appreciate day after day.

You can also trim on the machine
Focus on feasibility

Make much more complex shapes by also working along the length of the tube.

Double clamp, double clamp shaping
All-In-One Curving and shaping, one for the other
All-In-One Curvatura e sagomatura
All our tube shaping and bending machines are born to be integrated in full production processes. A considerable advantage in order to optimize production: to manage in a single operation the entire process and eliminate intermediate steps and processing in other equipment, to simplify logistics and reduce production times.
All-electric operation, much easier
Minimum setup time and consistent accuracy

All electric axis control for all tube forming machine movements (clamping and force control and force modulation) provides accurate tolerances and maximum repeatability.


All setup parameters are saved with the part program.

Low maintenance and high reliability

Simplified wiring and the elimination of hydraulics reduces the maintenance requirements and reduces wear on tube forming components. The obvious advantage is that the machine is safer and more reliable.


"All-Electric" technology means quiet and clean machines that operate with a major energy savings through reduced energy consumption.

Easy to learn. Very easy to use

Programming job sequences? Very easy. Simply select the punch you want to use and the program will define the most appropriate default settings based on the tool.

Facile da imparare. Facilissima da usare
Unlimited applications