3-RUNNER
Coil-Fed Straightening, Cutting
and End-Forming.

Your process in just-in-time perspective.

Choose the configuration that best suits the processing you want to perform.

3-RUNNER - Tube bending, sawing and end-forming machine of coil-fed tubes

Feeding from motorized coil feeder

3-RUNNER - Coil-fed tube straightening system for end-forming, tube bending and cutting machine

The tube is straightened out by a series of rollers

3-RUNNER - Coil-fed tube end-forming system

The end-forming module may be configured with up to six rams or four rams and one rotary rolling/finishing device

3-RUNNER - Orbital coil-fed tube pre-scoring system

Cutting is performed using orbital scoring or saw cutting devices. 

3-RUNNER - Automatic unloading system for sawing machine and end-forming for coil-fed tubes.

The automatic unloading device is fully-integrated into the work cycle and managed by the CNC

End-forming module for coil-fed tube sawing machine

End-form the part the
way you want.
 

Configure the end-forming module with four fixed rams and a rotary finisher/rolling device or six fixed rams, and the integrated unloading system. 

Exchange ram form tools quickly! The set-up is automatic and does not require manual adjustments. 

The quick-change system is designed to be simple and allow you to change each ram form tool in a few seconds, eliminating any risk of positioning or clamping errors, even by inexperienced operators.  

 

3-RUNNER - Fully electric system for straightening, cutting and shaping of the coil tube


A device cut to your needs. 

3-RUNNER - All-electric system for straightening, cutting, bending, and end-forming coil-fed tubes


For clean, chip-free cutting.

Eliminate swarf and achieve the highest edge quality by using the orbital scoring device that can be integrated in the machine or in the final end-forming module. 

3-RUNNER - All-electric coil-fed system for straightening, cutting, bending, and end-forming tubes


Very fast, very versatile. 

Maximize productivity with the saw cutting system fitted on the end-forming module and managed by a dedicated electric axis. .

3-RUNNER - All-electric coil-fed system for straightening, cutting, bending, and end-forming tubes

Are you ready for a
new production?
 

Exchange ram form tools quickly! The quick-change system is designed to be simple and allow you to change each ram form tool in a few seconds, eliminating any risk of positioning or clamping errors, even by inexperienced operators.

The set-up is automatic and does not require manual adjustments.


3-RUNNER - Dimensional end-forming control in-process

 

Perfect repeatability and quality. 

Have complete confidence in the quality of your batch using the dimensional geometry control in real-time and on each part.


3-RUNNER Applications.

3-RUNNER - Coil-fed end-formed tube
3-RUNNER - Coil-fed end-formed tube
3-RUNNER - Coil-fed end-formed tube
3-RUNNER - Coil-fed end-formed tube
3-RUNNER - Coil-fed end-formed tube
Special protective window for safety during laser cutting

Choose the safety
for your job.

3-RUNNER is CE certified and designed with safety features to
protect the operator during machine operation.
 


3-RUNNER - Coil-fed end-forming and cutting machine programming software.

 

VGP2D:
learn and start immediately.

Program the work sequence simply and intuitively. Simply select the punch you want to use and VGP2 programming software will set the optimal parameters for you.


You decide where to start.

Choose the coil feeder that best suits your production or space requirements: vertical, horizontal or Jumbo. 

The tube advancement and recovery is performed in-process and the motor is controlled in both directions. 

The feeder may be used in idle mode by selecting the function on the VGP3D program which is fully integrated with the machine software. 

3-RUNNER - All-electric system for straightening, cutting, bending, and end-forming tubes fed from large coils

Bend from coil with mandrel!

Connect the 3-RUNNER to the SMART and create a fully integrated process feed from a coil, end-form, cut and bend with mandrel.
Reduce the cycle time and the cost per part by performing several operations in parallel.
Eliminate semi-finished products to be handled and stored.
Bend with mandrel and comply with the strictest tolerances (average radius, diameter and thickness).

And it doesn't stop here. Discover our complete production solutions.

Discover our All-In-One technology


3-RUNNER Technical Information.

Maximum round tube bending capacity

Aluminum

1.13'' x 0.06'' (28.6 mm x 1.5 mm)

Copper

1.13'' x 0.06'' (28.6 mm x 1.5 mm)

Mild steel R = 52214 psi (360 N/mm²)

0.55'' x 0.04'' (14 x 1 mm)

Stainless steel

0.71'' x 0.04'' (18 mm x 1 mm)

Machine features

Axes

Up to 8

X Accuracy 

± .002'' (0.05 mm)

Passage

1.18'' (30 mm)

Max. installed power

12 kW (16 kW with accessories)

Average drawn power

4 kW

Machine weight without end-forming module

3858 lb (1750 kg)

End-forming module weight

1,350 kg

Handling

Up to 9 axes all governed by CNC

3-RUNNER - Layout of the basic 3-RUNNER machine

3-RUNNER
Basic machine layout

3-RUNNER - Basic machine basic layout

3-RUNNER
Basic machine layout with
shaping module

Training
A complete package for you and your operators is included in the purchase.
Find out more
Maintenance
You can take care of it or we can do it for you.
Find out now
Awareness
Evaluating the investment with the help of one of our experts is easier.
Find out more
Request a demo
{ module.image_field.alt }}
Are you interested in this machine?