The tube laser cutting machine with no compromise

3d laser cutting for standard or special shaped tubes. Fiber and CO2 technology

See what’s possible
LT 8.10 - 3D laser cutting machine with tilting head
With the LT 8.10,  high-quality angular cuts can be achieved.  It guarantees precision, without sacrificing high productivity and flexibility when processing round, square, triangular, I-beam and other special shapes.
  • cut diameters up to ∅ 240 mm (9.5”)
  • bar weight up to 40 kg/m (30 lb/ft.)
  • loading length 6,5 or 8.5 or 12,5 m (21" or 28’ or 40’)
  • unloading length 4,5 or 6.5 or 8.5 m (14" or 21’ or 28’) 
  • 3.5 kW COlaser source
  • automatic adjustments
  • 3D tilt cutting
  • cuttable materials: mild steel, stainless steel, aluminium (some alloys)
  • cut diameters up to ∅ 240 mm (9.5”)
  • bar weight up to 40 kg/m (30 lb/ft.)
  • loading length 6.5 or 8.5 or 12.5 m (21" or 28’ or 40")
  • unloading length 4.5 or 6.5 or 8.5 m (15 or 21’ or 28’)
  • 3 or 4 kW fiber laser source
  • automatic adjustments
  • 3D tilt cutting
  • cuttable materials: mild steel, stainless steel, aluminium, copper, brass, galvanized
New degrees of design freedom

The standard laser cutting head configuration of the LT8.10 has a tilting axis (± 45°) which makes it possible to do chamfers and other compelx cutting patterns.
Tilt cutting is particularly useful for making weld prep cuts in thick walled tubes. Or for accessing difficult to reach locations in open or special sections.

Fiber or CO2 laser cutting: free to choose the best tubes processing

We can offer the best solution for your production requirements. From the established CO2 laser to the most recent fiber technology, either are available on our machine.If you have questions, we will provide operating cost breakdowns and illustrate the advantages and limitations of each technology.

Rely on our experience and broad range of tubes laser cutting solutions to help you make the right choice.

Allroad: tubes like you have never imagined

You are not limited to just round, square or rectangular. Special shaped tubes or open sections can be programmed and cut without problems.

The use of non-standard shaped tubes (i.e. not round, square or rectangular) has expanded greatly over the years. You can process special sections and even open shapes without any special equipment. Thetube loading and handling capabilities combined with the design freedoms of the BLMelements software suite peerless provide unmatched capabilities.

Choose the right configuration
You can choose the loading system most suited to your production requirements (bundle loader, step-by-step, single bar) and you can position it where you need it: either in front of the machine or behind it.
You can choose the unloading system most suited to your production (standard, short part, scrap) and you can position it either in front of the machine or behind it.
You have everything you need to boost system efficacy and adapt the machine layout to your available space.

Attention to details during the entire process

You can load from the front or the rear. You can select the loading system most suited to your production requirements: bundle, step-by-step, or single bar.

Unloading solutions: facilitate the next steps

Short parts are conveyed out at constant rate on a conveyor table that boosts productivity with a faster part dischard.
Longer parts can be programmed to unload to the front or the rear of the machine. By dividing unloading by part type, part collection can proceed without interruption.

Accurate results on inaccurate material

Supporting arms and tables on the feeding and unloading line constantly support the bar movement during processing, tube, reducing axial tube deformations and increasing machining accuracy.

Additional tube measuring and error compensation solutions are available for distorted tubes.

Part quality, inside and out

An internal suction probe or ‘spoon’ can be inserted into the I.D. of round tubes to keep the inner surface of the tube clean when cutting. The ‘spoon’, which automatically adjusts to the tube diameter, catches dross and cutting debris and vacuums out particles that can adhere to the inside of the tube to produce a clean dross free internal finish.

Active Tools

Active Tools: make tube processing even simpler and more robust

Active Marking

Do you need the ability to identify and track every single part produced? Parts can be dynamically marked with Active Marking. Assign the area of the part to mark, then enter the text or data. The Lasertube machine will automatically add the updated value in real time: time, date, sequential part number / ID or even the order number. Handy and easy

Active Piercing

You will experience a considerable increase of productivity on thick walled tubes when using the optimised Active Piercing function. Increase piercing speed and reliability even when faced with inconsistent material quality and thickness. Spectacular!

Active Scan

This is the definitive tool for compensating for the errors that are created by irregularly shaped or bowed tubes. Active Scan can prevent positioning errors of the cut features when the tube is misshaped or not sufficiently rigid to be effectively contained by the mechanical supporting and guiding devices. Active Scan is an optical device that works in the background to calculate the compensations needed to adjust the part program to ensure that the required tolerances are achieved. Accurate!

Active Speed

Optimal cutting quality from the first part! You can obtain high cut quality on all parts even if you do not have specific laser cutting expertise. With Active Speed, the Lasertube machine will dynamically manage all the cutting parameters and deliver the same cut quality in difficult cutting conditions that you expect in common laser cutting jobs. Safe!

Active Focus

Active Focus’ dynamic control of the focus position provided quality cuts despite changes of material and wall thickness. Parts often contain 2D and 3D cuts, piercing and marking. Active Focus always provided optimal cutting conditions to insure quality and productivity. You have the best focus configuration at all times with no additional for programming. Extremely focused!

Artube: from the drawing to the part in one click

Drawing a part or an entire frame and transforming it into a machine program takes only a few seconds. You can import 3D models of parts drawn in other CAD programs and send everything needed to start production to the machine on the fly. With Artube you can exploit all the Lasertube’s potential from the word ‘go’, without errors.

Read more >

Artube: double your options

The ability to import a file, automatically transforming it into a machine program, implementing changes without needing to edit the original drawing file will make your life much easier and speed up the job.

BLMelements: everything under control

Program, simulate, produce and monitor all your systems – tube bending machines, Lasertube machines or sawing machines – from a single control point. Handy, quick and easy to use! BLMelements is the software suite that gives you all the functions you need to manage BLM GROUP systems.

All-In-One tube: bending and laser - made for each other

Bending and laser cutting this turns a tube into a finished product. But the use of two separate technologies has always caused difficulties. BLM GROUP machines are created to seemless marry these two technologies solving the problems of locating holes on bent tubular products. All automatically.

Read more >


Infinite applications

Examples of application with LT8.10